DNA metabarcoding of the prey and microbiome of museum specimen Antarctic trematomid fishes

Data Records

The data in this occurrence resource has been published as a Darwin Core Archive (DwC-A), which is a standardized format for sharing biodiversity data as a set of one or more data tables. The core data table contains 239 records.

This IPT archives the data and thus serves as the data repository. The data and resource metadata are available for download in the downloads section. The versions table lists other versions of the resource that have been made publicly available and allows tracking changes made to the resource over time.

Versions

The table below shows only published versions of the resource that are publicly accessible.

How to cite

Researchers should cite this work as follows:

Heindler F, Christiansen H, Frédérich B, Dettaï A, Lepoint G, Van de Putte A, Volckaert F (2020): DNA metabarcoding of the prey and microbiome of museum specimen Antarctic trematomid fishes. v1.3. SCAR - Microbial Antarctic Resource System. Dataset/Occurrence. https://ipt.biodiversity.aq/resource?r=historic_antarctic_fish_dataset_2019&v=1.3

Rights

Researchers should respect the following rights statement:

The publisher and rights holder of this work is SCAR - Microbial Antarctic Resource System. This work is licensed under a Creative Commons Attribution (CC-BY 4.0) License.

GBIF Registration

This resource has been registered with GBIF, and assigned the following GBIF UUID: ccba820a-bc62-4cf4-85f2-e0a991efcc6c.  SCAR - Microbial Antarctic Resource System publishes this resource, and is itself registered in GBIF as a data publisher endorsed by Scientific Committee on Antarctic Research.

Keywords

Samplingevent

Contacts

Geographic Coverage

Various places in the Souther Ocean and the coastal waters of the Antarctic continent. Geographic coordinates not available for all the museum specimen.

Taxonomic Coverage

Fish specimen of the genus Trematomus, with DNA samples of the stomach and gut for prey composition and micro biome.

Bacterial and Archaeal microbiome in the stomach and gut of the fish was profiled with the 16S ssu rRNA gene

Prey (eukaryotes) of the fish were investigated with the COI marker gene

Temporal Coverage

Project Data

No Description available

The personnel involved in the project:

Sampling Methods

Fish were carefully dissected: stomachs were opened to remove stomach content and a small portion of the hindgut (1 cm) was removed. Stomach content and hindgut were stored separately in 70% ethanol.

Method step description:

1. A large piece of stomach content (0.5 × 0.5 cm) or the entire piece of hindgut (1 cm) was placed into screwcap microtubes with 500 μl of Phosphate Buffered Saline (PBS) at pH 9. Tissue was fragmented thoroughly in each tube to ameliorate efficiency. Samples were heated to 100°C for 10 min, left to cool on ice for 5 min and then spun down with 20,000 × g for 5 min. PBS was carefully removed without taking any tissue and replaced by 500 μl of PBS at pH 7.2 and again heated to 100°C for 10 min. PBS was again carefully removed and further purification steps were conducted using the commercial Nucleospin® Tissue (Macherey-Nagel, Accession number: 740952) DNA extraction kit following the manufacturer's protocol.
2. For prey identification a 313 bp region of the COI gene was amplified from the stomach content using the tailed primers NGSmlCOIint and NGSjgHCO2198. The V3 and V4 region (460 bp) of the 16S rRNA gene was amplified using the tailed primers 16s-IllumTS-F and 16s-IllumTS-R to assess the microbiome composition. The reaction mix for the amplicon PCR for COI contained 12.5 μl of MytaqTM 2x Mix (Bioline, Accession number: BIO-25041), 0.5 μl of each primer (20 μM), 10.5 μl of molecular grade water and 1 μl of DNA template with a PCR profile of 10 s of denaturation at 95°C, 30 s of annealing at 62°C and 60 s elongation at 72°C for 16 cycles with the annealing temperature dropping every cycle by 1°C, followed by 25 cycles with an annealing temperature at 46°C. The reaction mix for the amplicon PCR for 16S contained 12.5 μl of MytaqTM 2x Mix, 2.5 μl of each primer (1 μM), 2.5 μl of DNA template (5 ng ul−1) and 5 μl of molecular grade water with a PCR profile of 60 s of initial denaturation at 95°C followed by 25 cycles of 15 s denaturation at 95°C, 15 s of annealing at 55°C and 10 s elongation at 72°C, finishing with a final extension of 72°C for 300 s. PCR products were cleaned up using Agencourt AMPure XP beads (Beckman Coulter, Accession number: A63882) following the manufacturer's instructions with a bead to template ratio of 0.8 to 1. Thereafter followed an indexing PCR, which binds a unique primer barcode to each respective sample following Lange et al. (2014) with a PCR mix of 10 μl of MytaqTM 2x Mix, 0.5 μl of each forward and reverse indexing-primer (to form a unique identifiable primer combination for each sample; 20 μM) and 9 μl of DNA template with a PCR profile of an initial denaturation of 1 min at 95°C followed by 15 cycles of denaturation for 15 s at 95°C, 15 s of annealing at 51°C and 10 s of extension at 72°C finishing with a final extension of 5 min at 72°C. The PCR product was cleaned up again, then quantified using the commercial Quant-iTTM Picogreen® kit (Thermo Fisher) and pooled, if sufficient template (20 ng) was available. Sequencing took place on an Illumina MiSeq PE 3000 (Genomics Core, KU Leuven, Belgium).

Collection Data

Bibliographic Citations

1. Heindler F.M., Christiansen H., Frédérich B., et al. (2018) ‘Historical DNA Metabarcoding of the Prey and Microbiome of Trematomid Fishes Using Museum Samples’. Frontiers in Ecology and Evolution 6: 151, https://doi.org/10.3389/fevo.2018.00151. https://doi.org/10.3389/fevo.2018.00151.

Additional Metadata